- Powerful Final Tier 4-compliant diesel engine
- AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes
- Specs & Compare
John Deere
1023E
Sub-Compact Tractor
Key Specs
Engine power (gross) | SAE J1995 rated power: 16 kW 21.5 hp 21.8 PS at 3200 rpm |
|||
---|---|---|---|---|
Power take-off (PTO) power | 11.1 kW 14.9 hp |
|||
Steering hydraulics | 13.2 L/min 3.5 gpm |
|||
Implement hydraulics | 13.2 L/min 3.5 gpm |
|||
Hitch type | Limited Category 1 | |||
Lift capacity, 24-in. behind link arms | 344 kg 758 lb |
|||
Standard transmission; forward/reverse | Hydrostatic – two range | |||
Cruise control | No | |||
Approximate shipping weight (open-station; cab) | Open station: 656 kg 1446 lb Cab: Not applicable |
|||
Wheelbase | 1450 mm 57.1 in. |
Manufacturer | Yanmar® | |||
---|---|---|---|---|
Engine model | 3TNM74F-NCJT | |||
Engine power (gross) | SAE J1995 rated power: 16 kW 21.5 hp 21.8 PS at 3200 rpm |
|||
Power take-off (PTO) power | 11.1 kW 14.9 hp |
|||
Rated engine speed | 3200 rpm | |||
Type | Diesel | |||
Injection pump type | Indirect injection | |||
Aspiration | Natural | |||
Emissions compliance | Final Tier 4 | |||
Cylinders/displacement | Three cylinders: 0.993 L 60.6 cu in. |
|||
Number of cylinders | Three | |||
Cylinder liners | Cast-in-block | |||
Bore and stroke | 74 x 77 mm 2.91 x 3.03 in. |
|||
Compression ratio | 23.5:1 | |||
Lubrication | Pressurized | |||
Cooling system | Water pump | |||
Air cleaner | Dual element | |||
Engine torque at rated speed | 47.7 Nm 35.2 lb-ft |
|||
Fuel tank capacity | 24 L 6.3 U.S. gal. |
Battery size | 500 CCA | |||
---|---|---|---|---|
Alternator (12-V) | 40 amp | |||
Starter size | 1.2 kW 1.6 hp |
Type | Indirect injection |
---|
Standard transmission; forward/reverse | Hydrostatic – two range | |||
---|---|---|---|---|
Left-hand reverser | No | |||
Final drive | Spur gear | |||
Brakes | Wet disc (left-hand pedal) | |||
Steering | Power | |||
Axle capacity | Front 612 kg 1349 lb Rear 715 kg 1576 lb |
|||
Creeper | No | |||
Cruise control | No | |||
Differential lock | Yes |
Type | Open center | |||
---|---|---|---|---|
Pump rated output | Steering 13.2 L/min 3.5 gpm Implement 13.2 L/min 3.5 gpm 24 L/min 6.3 gpm |
|||
Pump type | Single gear | |||
Maximum operating pressure | 138 bar 2000 psi |
|||
Draft control sensing | Select control | |||
Remote control valves available | Three |
Type | Limited Category 1 | |||
---|---|---|---|---|
Lift capacity, 24-in. behind link arms | 344 kg 758 lb |
Standard | Rear: 540 rpm Mid: 2100 rpm |
|||
---|---|---|---|---|
Control | Independent | |||
Clutch | Wet disk | |||
Brake (for mid and rear PTO) | Wet disk |
Crankcase with filter | 2.7 L 2.9 gal. |
|||
---|---|---|---|---|
Transmission and hydraulic system | 12.3 L 3.2 gal. |
Type | Spur gear | |||
---|---|---|---|---|
Differential lock | Yes |
Rollover protective structure | Type Foldable Yes |
|||
---|---|---|---|---|
Platform – flat/straddle | One-piece semi flat | |||
Gear shift location – console/floor | Left-hand side |
Wheelbase | 1450 mm 57.1 in. |
|||
---|---|---|---|---|
Front axle clearance | 195 mm 7.7 in. |
|||
Turning radius without brakes | Outside front tire: 2.51 m 8.2 ft |
|||
Limited slip differential | No | |||
Approximate shipping weight (open-station; cab) | Open station: 656 kg 1446 lb Cab: Not applicable |
Front | R3 Turf: 18×8.50-10 R4: 18×8.5-10 |
|||
---|---|---|---|---|
Rear | R3 Turf: 26×12-12 R4: 26×12-12 |
|||
Front tread range | 931 mm 36.7 in. |
|||
Rear tread spacing | 895 mm 35.2 in. |
Toolbox | Yes |
---|
Reviews
There are no reviews yet.